Oceanus

 

 

Model
Drive
FAD
RPM
Filling
rate
Drive
Filter System
Dimensions approx. cm
Weight net
max. 300 bar (1)
l/min*
 min-1
min**
kW
HP
TRIPLEX®
L
W
H
approx. kg
OCEANUS-B
4-stroke petrol (2)
140
2300
1,4
4,0
5,5
P21
79
35
42
47
OCEANUS-E
3-phase
140
2300
1,4
3,0
4,0
P21
66
40
42
52
OCEANUS-W
single-phase (3)
140
2300
1,4
3,0
4,0
P21
66
40
42
52

1) available with switch over device 330 / 225 bar or 225 bar/330 bar alternatively
2) with telescopic intake tube and HONDA motor
3) 230V, 50 Hz
* cylinder filling from 0 to 200 bar
** filling rate for 1 litre cylinder capacity from 0 to 200 bar

 

Durable and extremely tough

The frame and filling devices are made of stainless steel while coolers are made of galvanized steel for the best possible resistance to corrosion.
Piston rings are made from a high-tech synthetic material with outstanding wear and tear resistance.

 

Extremely Seaworthy

The large volume of the oil sump allow operations of the compressor in extreme inclination of up to 30º angle.

 

Safe handling

 

 

 

 

 

 

Moving parts such as v-belt, pulley and fan have guard protection.
The caution signs and relevant safety warnings are in the manual. P21 filter system is supplied with TRIPLEX® filter cartridge.
P21 filter comprises of condensate outlet, aluminium filter housing and high pressure safety valve.
Condensate drain has manually operated drain valves located on the bottom of the filter housing.
OCEANUS compressor is supplied with L-shaped frame and plastic fan guard. The stainless steel carrying handle fixed to the base plate allows easy transport by two people.

 

Moving parts such as v-belt, pulley and fan have guard protection.
The caution signs and relevant safety warnings are in the manual. P21 filter system is supplied with TRIPLEX® filter cartridge.
P21 filter comprises of condensate outlet, aluminium filter housing and high pressure safety valve.
Condensate drain has manually operated drain valves located on the bottom of the filter housing.
OCEANUS compressor is supplied with L-shaped frame and plastic fan guard. The stainless steel carrying handle fixed to the base plate allows easy transport by two people.

 

OCEANUS is designed for vessels, diving boats and diving platforms. The use of stainless steel and Kevlar ensures extreme resistance to corrosion.
The lightweight and compact design makes the unit able to fit into every car boot. OCEANUS has an outstanding performance and can fill up diving cylinders 40% faster than JUNIOR II compressors.